Waldent Electric Pulp Tester

• Battery Operated
• Output Voltage: 9.0V DC
• Output Current: 9.0 mA

MAINTENANCE:

• Should not be dismantled.
• Standard disinfection procedure should be used for disinfection, should be stored in a proper way in the original packaging box.

• The unit should be scrubbed by pure water or ethanol and follow the standard disinfection procedure to disinfect the materials.
• The pulp tester should be placed in the original packaging box in a dry and clean cupboard.
• Do not open the Power Unit, except to change the battery. There are no user-serviceable parts inside.Internal repairs are to be made only by authorized Parkell personnel, by returning the unit to the service address at the end of these instructions

• Handle the power unit with care
• Battery should be removed if unit is to be stored unused for more than 30 days
• To prolong battery life, the device automatically turns off after 14 seconds of inactivity
• When the battery capacity is low, the Left and Right digital display digits will flash alternatively while the unit is activated. Replace the battery as explained in the section “Changing the Battery”
• If a Tooth Probe becomes loose in the mount of the Power Unit, it may be tightened by carefully inserting a flat screwdriver blade into the split metal base of the probe and gently expanding the sides apart with a twist of the tool.
• Discard and replace any Tooth Probe if the metal or the insulation becomes damaged during use.