Prevest Denpro Fusion Universal Composite Intro Kit

• Extremely high abrasion resistance
• Higher filler contents
• Excellent physical properties for long lasting restorations
• Lower polymerization shrinkage than conventional composites

It is a visible light cured, radiopaque highly filled, nano filled hybrid composite restorative material for all cavity classes of anterior and posterior teeth.

  Indications

• Correction of shade and shade for better aesthetics
• Direct Restoration of all cavity classes in anterior and posterior teeth
• Core build-up & Composite inlays
• Preventive polymerization and repairs of composite ceramic veneers

Advantages

* Excellent physical properties for long lasting restorations.
* Lower polymerization shrinkage than conventional composites.
* Higher filler contents.
* Extremely high abrasion resistance.

Composition

• Bisphenol  A Glycidyl methacrylate
• Bisphenol a diethoxy methacrylate
• Urethane dimethacrylate
• Triethylene gycol dimethacrylate
• Silanated barium glass powder
• Amorphous fumed silica

What are nanohybrid resin composites?

The nanohybrid resins generally presented inferior properties compared with the nanofilled composite and either similar or slightly better properties compared to the microhybrid material. Under clinical conditions, nanohybrid resins may not perform similarly to nanofilled materials.

Differences between various composites

Precautions

• Eugenol containing materials should not be used with this material because they may effect polymerization and interfere with the hardening process. Being sensitive to heat and light, the syringes should be kept away from direct heat and light.
• After skin contact: Wash with plenty of water and soap.
• After eye contact: Rinse with water and consult a physician.
• After swallowing:Seek medical advice immediately.

Storage conditions: store between 10’ to 25’C. Keep away from moisture.

Shelf life : 3 years from date of manufacturing

Contraindications

• If  allergic to methacrylate resins. Avoid prolonged inhalation and contact with skin.

Intro Kit :-

• 4 x 4g Syringes (A2, A3, B2, B3)
• 1 x 5ml Fusion Bond 5
• 1 x 2ml Syringe Actino Etching Gel
• 10 x Micro Brushes
• 10 x Applicator Tips

Step 1- Clean the tooth to be treated and adjacent teeth with a brush and prophy paste and select the shade using Shade Guide.

Step 2- Prepare the cavity (No residual amalgam or other base material should be left in the cavity)

Step3- Apply Actino 37% Phosphoric Acid Etchant Gel for 15-20 sec. Remove Gel with vigorous water spray and rinse conditioned area for at least 10 sec. Blot dry conditioned area with a moist cotton pellet.

Step 4- Apply Fusion Bond 5 dentine bonding agent with a disposable brush to the entire cavity. Ensure thorough wetting of the entire cavity. Allow 20 sec air drying and re apply another coat of dentine bonding agent. Remove excess solvent by gently drying with dry air for at least 5sec to ensure uniform glossy surface. Cure adhesive for 20-30 sec using standard curing light.

Step 5- Dispense the material using shaping instruments. Contour the material in the cavity. Light cure for 40 sec using standard curing light. When necessary build in increments of 2mm maximum using a layering technique. Shape and polish using standard technique and at last stage apply Nano Coat protective varnish.