Features
- Speed upto 35,000 RPM.
- Forward & reverse direction selection.
- Hand & foot operation.
- Extra torque for smooth working.
- Low heat generation suitable for long use.
- No noise & vibrations.
Description
Waldent Clinical Micromotor is designed to facilitate more user-comfortability for the professional and a significant reduction in procedural times for their patients.
- Waldent Clinical Micromotor used for hard tissue trimming (teeth, bone).
- It is also used in denture trimming polishing of prosthesis.
INDICATION : A dental drill or handpiece is a hand-held, a mechanical instrument used to perform a variety of common dental procedures including removing decay, polishing fillings, and altering prosthesis.
ADVANTAGES :
- High-powered 35,000 rpm.
- Non-stage speed system (it’s well designed to output from zero to 35,000rpm by using a non-stage speed system).
- Right & Left turning ability.
- Foot ON/OFF switch system.
- Compact and portable size
- Continous variable speed control
- One- touch change of the driving direction for efficient operation
- No noise
Key Specifications
COMPOSITION:
- Made up of high-quality Stainless steel material.
TECHNICAL SPECIFICATION
- Max Speed – 35,000 rpm
- Torque – 2.9 Ncm
- Input –Â 100,110/220, 240V (50/60 Hz)
- Output –Â 32V
Packaging
- 1 x Micromotor with Cord
- 1 x Control Box
- 1 x Foot Pedal
- 1 x Stand
Direction to Use
- Check that the power switch is set to an OFF position.
- Confirm adequate power line voltage (100V to 240V).
- Connect the power supply to the electrical mains.
- Connect the power cord to the EndoStation by inserting the connector into the receptacle on the rear aspect of the device. Make sure the power cord is well-fitted.
- Place the footswitch properly to allow easy operation.
- Connect the footswitch cord into the receptacle at the front panel of the device.
- Pay attention to align the plug with its receptacle.
- Plug the micromotor cord to the device.
- Pay attention to align the plug with its receptacle.
- Plug the E-type contra-angle handpiece onto the micromotor and the handpiece head to the handpiece, if applicable.
Warranty
- Manufacturer/Importer warranty of 1 Year as applicable for this product.
- Service and Warranty are handled by the manufacturer/importer directly for this product
- The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.
Reviews
There are no reviews yet.